Every guitarist should experience on a daily basis.Unfortunately, the awesome levels of volume this produces makes it totally impractical for most everyday situations. What you really need is a device that will absorb some of the amp's energy without affecting its natural qualities of distortion, tone and feel.
The AT-100 is that dream device, providing full control of the level between your amplifier and speaker without squashing any of the dynamic feel and tone. This totally roadworthy box links between your amplifier and either one or two cabinets.
CONTROLS:
·Master Output Control attenuates the output level of a fully cranked 100-Watt amplifier all the way down to total silence (used with Input Attenuation Switch set at -12dB)
·Input Attenuation Switch 3-position (0.0dB, -6dB, -12dB) attenuation for speaker input
·Compensate Switch 3-position (Off, Bright 1, Bright 2) "brightness" circuit to compensate for an overly bright or dull speaker cabinet
·Speaker On-Off Switch for headphone-only use or quiet recording using Line Out jackt
·JACKS (1/4" phone):
·Line Out
·Input (max. 150 Watts)
·Output
·Head Phones (requires -12dB attenuation)
Input impedances: 4 ohm,8 ohm and 16 ohm
Power Handling: Up to 150 Watts
DIMENSIONS:
·30cm x 20cm x 20cm (11.8" x 7.8" x 7.8")
WEIGHT: 3.5kg (7.72 lbs)
(NOTE: Cords from amp and to speakers must be heavy-duty speaker cable with 1/4" phone-type speaker connectors.)
Kldguitar AT -100 power amp attenuator was placed on 11/9/11 by Kldguitar and is located in Huizhou. To find additional New and Used Musical Instruments For Sale in Other, please follow this link.